|

Best Sediment Filter for Well Water (2026): Types, Micron Sizes and Picks

Boreholeflow is reader supported. When you buy through links on this page, I may earn a commission at no extra cost to you. Read the full disclosure.

What to know
  • For sand and grit, start with a spin down filter (60 to 100 mesh) before anything else. You flush it with a valve instead of buying cartridges.
  • For silt and cloudiness, use a cartridge filter, stepping down from 20 or 30 micron to 5 micron if needed.
  • Most homes with 3 or more bathrooms need 4.5 x 20 inch “Big Blue” housings to avoid a pressure drop.
  • Use the picker below to get a starting setup for your water.

Sand in the toilet tank, grit in the aerators, a softener valve that keeps failing. Sediment is the most common problem in well water, and the easiest to fix.

This guide explains the types of sediment filter, which micron rating to choose and how to set them up, with picks for each kind of well. Picks are based on manufacturer specifications and owner reviews, so check the listing for the current model and price.

Sediment filter picker

Sediment filter picker

Tell us what is in your water and how your home uses it. We suggest the filter setup and micron ratings to start with.

Types of sediment filter

TypeBest forProsCons
Spin down filterSand, grit, pipe scaleClear bowl, flush valve, washable screenDoes not catch fine silt
Pleated cartridgeSilt and general sedimentLarge surface area, low pressure drop, some are washableFine pleats clog fast with heavy sand
String wound or spun cartridgeMixed sedimentTraps particles through its depthReplace, cannot be cleaned
Backwashing sediment filterHeavy sediment in big homesCleans itself automatically, no cartridgesNeeds a drain and more space

Most well owners do best with two stages: a spin down filter to stop the sand, then a cartridge to polish the water.

Which micron rating do you need?

A micron is a thousandth of a millimetre. A human hair is about 70 microns across, and fine sand grains start at around 60.

RatingWhat it catchesUse it
100 to 60 mesh (about 150 to 250 micron)Sand and gritFirst stage on wells with sand
50 to 30 micronCoarse silt, rust flakesFirst cartridge stage
20 micronMost visible sedimentGeneral whole house filter
5 to 10 micronFine silt and cloudinessSecond stage, before a softener
1 micronVery fine particlesBefore UV or some RO systems

Going straight to 5 micron on a sandy well clogs the cartridge in days. Step down in stages so each filter does a share of the work.

Best sediment filters for well water

1. Spin down filter for sand

A clear bowl spin down filter such as the iSpring WSP-50 or the Rusco Spin Down sits right after the pressure tank. Sediment spins to the bottom of the bowl, and you open a valve to flush it out.

Pick the mesh to match your sand, and choose 1 inch ports if your main line is 1 inch so the filter does not limit flow.

See spin down filters on Amazon

2. Big Blue housing with a 20 micron cartridge

A 4.5 x 20 inch housing like the Pentek Big Blue holds a large cartridge that can last months on a well. It suits homes with three or more bathrooms.

See Big Blue housings on Amazon

3. Two stage whole house system

If you want everything in one kit, two stage systems such as the iSpring WGB21B pair a sediment cartridge with a carbon cartridge on one bracket. Carbon also helps with taste and odor.

If your water smells of rotten eggs, read rotten egg smell in well water first, as carbon cartridges alone may not keep up.

See 2 stage systems on Amazon

4. Washable pleated cartridges

Pleated polyester cartridges can be rinsed with a hose and reused a few times. They cut running costs on wells with steady silt.

See pleated cartridges on Amazon

5. Backwashing filter for heavy sediment

If you are changing cartridges every couple of weeks, an automatic backwashing sediment filter cleans itself on a timer. It needs a drain and an outlet, so it suits a basement or well house.

See backwashing filters on Amazon

For a full system with carbon and other stages, see the best whole house filters for well water.

How to set up a sediment filter

  1. Place it after the pressure tank. Filters before the tank see pump surges and can starve the switch.
  2. Install a bypass. Three valves let you keep water flowing while you change a cartridge.
  3. Add pressure gauges. A gauge before and after shows when the cartridge needs changing, usually at about a 10 psi drop.
  4. Spin down first, cartridge second. Then any softener, iron filter, UV or RO.
  5. Shut off the water and release pressure before opening a housing. Lubricate the O ring with food grade silicone.

Changing a filter is a good moment to check your switch, as covered in well pressure switch settings.

Fix the cause too

A filter treats the symptom. A sudden increase in sand can mean the pump is set too low, the screen or casing is damaged, or the well is running low.

Frequently asked questions

What is the best sediment filter for well water?

For most wells, a spin down filter followed by a 20 micron cartridge in a Big Blue housing. Sandy wells need the spin down stage, while silty water does best with pleated or spun cartridges.

What micron sediment filter is best for well water?

Start with 20 to 30 micron for general sediment, then add a 5 micron stage if fine silt still gets through. Use 1 to 5 micron before UV or reverse osmosis.

Should a sediment filter go before or after the pressure tank?

After the pressure tank. That protects the filter from pump surges and keeps the pressure switch reading correctly.

How often should I change a well water sediment filter?

When the pressure drop across it reaches about 10 psi, or when flow falls noticeably. On many wells that is every 3 to 6 months, but heavy sediment can mean every few weeks.

Will a sediment filter remove iron?

It removes rust particles but not dissolved iron. If water comes out clear and turns orange after standing, you need an iron filter.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *