Home / Newsletter
Free Pressure Tank Sizing Checklist
The Boreholeflow Newsletter
Practical advice for people who run their own well or borehole, written by a driller with over a decade in the field.
Get the pressure tank sizing checklist in your inbox
- A one page PDF with the drawdown formula, the precharge rule and tank size tables
- US and metric units side by side
- One email when a new guide or calculator goes live
Before you buy a tank
How to size a pressure tank in five steps
The pressure tank sizing calculator does the maths for you, but the steps are simple enough to check by hand.
- Find your pump flow rate in gallons or litres per minute.
- Pick a minimum run time, so the motor is not starting and stopping every few seconds.
- Multiply the two to get the drawdown you need, which is the water the tank delivers between cut-in and cut-out.
- Match that drawdown to a tank size for your switch setting, such as 30/50 or 40/60.
- Then set the air precharge 2 psi below the cut-in pressure, with the pump off and the tank empty.
If your numbers fall between two sizes, choose the larger tank. In addition, check the precharge once a year, because a waterlogged tank is a common cause of rapid cycling.
What to expect
Useful, rare and easy to leave
Practical advice from the field
Pumps, pressure tanks, water treatment and off grid water, from someone who installs them.
No deal blasts
You only hear from me when there is something new and genuinely useful.
Built for everywhere
Written for owners in the US, Europe and beyond, with both unit systems.
